Dave Kane Offline. I did not know you could download it directly from the spark. Been having the same problem, i noticed that the RC disconnects from spark then the download fails. RobertWSimpson Offline. Just another option.
DJI Elektra Offline. Advanced Bold Text Color Upload. Maybe the best way is to send it back, get a refund, forget about DJI and buy a cheaper camera that doesn't need this non-sense activation!
I solved the issue thanks to other thread, simply by enabling Airplane mode, then enabling manually WiFi and Bluetooth - worked like a charm. Advanced Bold Text Color Upload. You need to log in before you can reply Login Register now. Bonjour ou trouvez-vous le dossier racine!!! Yo sigo con el mismo problema Firmware updates can optimize flight stability and also usually come with new features. To help you avoid problems during firmware updates, we have summarized five common reasons that can lead to update failure and what to do if the firmware upgrade fails.
The upgrade process can take a long time, especially when there are many new features added. If the battery runs out of juice, the update will be interrupted. Furthermore, if there is more than one firmware version on the SD card and the filename or storage location is incorrect, the update will fail.
Restart aircraft - Reboot helps. If not, update the firmware. Check whether gimbal cover is removed and ensure gimbal can rotate freely - Be careful. You can burn the suspension motors, if you forget to remove the cover.
Restart aircraft. If calibration does not work, replace the gimbal. Watch the video how to do it. If it does not help, the sensors are broken and must be replaced. Often errors occur due to a software failure and these problems can be solved by updating the firmware. Unfortunately, many errors can be caused due to a hardware problems of the module. But don't worry, you can always fix everything.
In video below, I'll show you how to disassemble the Dji Mavic Mini to replace any of the broken parts. A motor error may be caused due to defective of the ESC board. Everything written above is based only on my experience. If you have experience repairing the Mavic Mini please share it. Twitter Facebook Favorite 6 Like Use props. Akirasho Offline. Thanks for posting. Great help About the ribbon connectors: there's usually two blobs of hot glue on either side of them. There's a high chance of snapping them off you don't warm up the glue.
About another error that I've seen happening: no GPS, somehow related to battery fault or bad connection, to be investigated I've seen this posted by two different users. DAFlys Offline. Thanks for the info. Dmitry Vishnevskiy Offline. First Officer.
Thanks for posting! Another code to add to your list, , is an error code having to do with ESC communication. When you have this error,the motors won't do their little vibration and start up, and won't make that little dji tone either.
In my case it was a problem with the ribbon cable connecting the main and ESC boards. Main connectors simply needed to be under a tad bit of pressure see end of my thread.
But I'm sure this can range to broken ribbon cables as well. Thanks for posting the other codes and the video!
0コメント